Scientific publications

GAMBERINI R.; GRASSI A.; GAMBERI M.; MANZINI R.; REGATTIERI A., U-Shaped assembly lines with stochastic tasks execution times: heuristic procedures for balancing and re-balancing problems, in: Business and Industry Symposium, SAN DIEGO, The Society for Modeling and Simulation Inter., 2004, pp. 137 - 143 (atti di: 2004 Advanced Simulation Technologies Conference, Arlington, Virginia, April 18-22) [Contribution to conference proceedings]

Regattieri, Alberto; Gamberi, Mauro; Manzini, Riccardo; Persona, A., Forecasting methods for lumpy demand of aircraft spare parts, in: 10th ISSAT International Conference on Reliability and Quality in Design, NJ, Hoang Pham, 2004, pp. 147 - 152 (atti di: ISSAT Iternational Society of Science and Applied Technologies, Las Vegas, Nevada, USA, August 5-7) [Contribution to conference proceedings]

G., Benni; Rivola, Alessandro; Dalpiaz, Giorgio; E., Mucchi, A Non Linear Model of the Geartrain of the Timing System of the Ducati Racing Motorbike., in: Proceedings of the 5th International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques, PARIS, Ed. Société Française des Mécaniciens, 2004, CDROM, pp. 1 - 10 (atti di: 5th Int. Conference on Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques, Senlis, France, 11-13 October 2004) [Contribution to conference proceedings]

ZANARINI A.; CATANIA G., Evaluation of spatial mechanism eigenproperties with respect to kinematical configuration, in: Proceeding of Surveillance 5 - 5ème Conférence Internationale "Méthodes de Surveillance et Techniques de Diagnostic Acoustiques et Vibratoires", s.l, CETIM, 2004, pp. 1 - 10 (atti di: Surveillance 5 - 5ème Conférence Internationale "Méthodes de Surveillance et Techniques de Diagnostic Acoustiques et Vibratoires", CETIM Senlis, Francia, 11-13 October 2004) [Contribution to conference proceedings]

G. DALPIAZ; A. FERNANDEZ DEL RINCON; E. MUCCHI; RIVOLA A., Model-based Analysis of Dynamic Phenomena in Gear Pumps., in: -, Proceedings of the 5th International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques, PARIS, Ed. Société Française des Mécaniciens, 2004, CDROM, pp. 1 - 11 (atti di: 5th Int. Conference on Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques, Senlis, France, 11-13 October 2004) [Contribution to conference proceedings]

Rivola, Alessandro; Carlini, Andrea, A Camshaft Non-Linear Model for the Desmodromic Valve Train Simulation., in: -, Proceedings of ISMA 2004 - International Conference on Modal Analysis Noise and Vibration Engineering, s.l, s.n, 2004, pp. 2051 - 2065 (atti di: ISMA 2004 – International Conference on Modal Analysis Noise and Vibration Engineering, Leuven, Belgium, 20-22 September 2004) [Contribution to conference proceedings]

CATANIA G.; MAGGIORE A., Dynamic behaviour of flexible mechanical couplings under general misalignment Condition, in: Proc. of IMECE2005, s.l, ASME, 2004, II, pp. 1 - 8 (atti di: ASME International Mechanical Engineering Congress and R&D EXPO, IMECE2004, Washington, Nov. 13-19, 2004) [Contribution to conference proceedings]

VERTECHY R.; PARENTI CASTELLI V.; K.J. WALDRON, Electro/Magneto-Sensitive elastomers and Lagrangian Electro/Magneto-Statics, in: Proceedings of the International Conference on Smart Materials - SmartMat-'04, CHIANG MAI, Chiang Mai University, 2004(atti di: SmartMat 04, International Conference on Smart Materials, Chiang Mai, Thailand, 1-3 Dicembre 2004) [Contribution to conference proceedings]

CESCHINI L.; G. PALOMBARINI; G. SAMBOGNA; D. FIRRAO; G. SCAVINO; G. UBERTALLI, Friction and wear behaviour of sintered steels submitted to sliding and abrasion tests, in: 4th AIMETA International Tribology Conference, ROMA, Ed. R. Bassani, N, 2004, 1, pp. 63 - 72 (atti di: 4th AIMETA International Tribology Conference, Roma, 14-17 Settembre 2004) [Contribution to conference proceedings]

MORINI G.; G. BIZZARRI, Greenhouse gas reductions and primary energy savings linked to the upgrade of conventional plants by means of hybrid plants, in: BREBBIA, Proc. of 12th Int. Conf. on Modeling, Monitoring, and Management of Air Pollution, SOUTHAMPTON, WIT Press, 2004, I, pp. 327 - 337 (atti di: 12th Int. Conf. on Modeling, Monitoring, and Management of Air Pollution, null, 30 Giugno-2 Luglio) [Contribution to conference proceedings]

MORINI G.; M. LORENZINI; S. SALVIGNI; M. SPIGA, Scambio Termico Convettivo in Presenza di Interazioni Elettrostatiche tra Fluido e Parete, in: C. PISONI, Atti del XXII Congresso Nazionale sulla Trasmissione del Calore (UIT), PISA, ETS, 2004, 1, pp. 139 - 144 (atti di: XXII Congresso Nazionale sulla Trasmissione del Calore UIT, null, 21-23 Giugno) [Contribution to conference proceedings]

MORINI G., Laminar forced convection of liquid flows through silicon microchannels, in: S. COLIN, 2nd Colloque SHF Microfluidique, PARIS, SHF, 2004, 1, pp. . - . (atti di: 2nd Colloque SHF Microfluidique, ., 15-17 Dicembre) [Contribution to conference proceedings]

MORINI G.; M. LORENZINI; M. SPIGA, A Criterion for the Experimental Validation of the Slip-Flow Models for Incompressible Rarefied Gases Through Microchannels, in: S. K. KANDLIKAR, Proc. of 2nd Int. Conf. on Microchannels and Minichannels, NEW YORK, ASME, 2004, 1, pp. 351 - 358 (atti di: of 2nd Int. Conf. on Microchannels and Minichannels, null, 17-19 Giugno) [Contribution to conference proceedings]

Falcioni, Stefania; Morini, GIAN LUCA; Semprini, Giovanni; Cocchi, Alessandro, Caratterizzazione numerica di tubi capillari percorsi da fluidi HFC, in: AA.VV., Atti del LX Congresso Nazionale dell'Associazione Termotecnica Italiana (ATI), PADOVA, SGE, 2004, II, pp. 1709 - 1719 (atti di: LX Congresso nazionale ATI, null, 20-22 Settembre) [Contribution to conference proceedings]

A., Barba; Morini, GIAN LUCA; B., Musi; M., Spiga, Slip Flow con Condizioni al Contorno del Secondo Ordine, in: C. PISONI, Atti del XXII Congresso Nazionale sulla Trasmissione del Calore (UIT), PISA, ETS, 2004, 1, pp. 309 - 316 (atti di: XXIICongresso nazionale sulla Trasmissione del Calore UIT, null, 21-23 Giugno) [Contribution to conference proceedings]

MANZINI R.; CASSARINI A.; PARESCHI A.; REGATTIERI A., Progettazione e gestione di un network distributivo multilivello, in: XXXI Convegno Nazionale ANIMP/OICE/UAMI, s.l, ANIMP, 2004(atti di: XXXI Convegno Nazionale ANIMP/OICE/UAMI, Monastier di Treviso, ITALY, Ottobre 2004) [Contribution to conference proceedings]

GAMBERI M.; MANZINI R.; REGATTIERI A.; STUPAZINI M., Sviluppo di un software per l'analisi logistica multiscenario dei flussi fisici intraziendali, in: XXXI Convegno Nazionale ANIMP/OICE/UAMI, s.l, ANIMP, 2004(atti di: XXXI Convegno Nazionale ANIMP/OICE/UAMI, Monastier di Treviso, Ottobre 2004) [Contribution to conference proceedings]

GARAI M., The new European standard for qualifying added devices (invited lecture), in: S.N., Proceedings of ICA 2004 - Acoustical science and technology for quality of life, KYOTO, s.n, 2004, 1, pp. Paper Mo.5.F.3 - Paper Mo.5.F.3 (atti di: International Congress on Acoustics I.C.A. 2004, null, 4-9 April 2004) [Contribution to conference proceedings]

TROIANI E.; P. TORTORA; G.PIRACCINI; M.TAPPI, Finite Element Modeling for Static and Dynamic Analyses of a Low-Cost Microsatellite Platform, in: AA.VV., 55th International Astronautical Congress, Vancouver (Canada), 4-8 Ottobre 2004, VANCOUVER, s.n, 2004(atti di: 55th International Astronautical Congress, Vancouver, Canada, null, 4-8 Ottobre) [Contribution to conference proceedings]

CALLEGARI S.; TALAMELLI A.; ZAGNONI M.; GOLFARELLI A.; ROSSI V.; TARTAGNI M.; SANGIORGI E., Aircraft angle of attack and air speed detection by redundant strip pressure sensors, in: D. ROCHA, P.M. SARRO, M.J. VELLEKOOP, Proceedings of IEEE Sensors 2004, VIENNA, IEEE Press, 2004, 3, pp. 1526 - 1530 (atti di: IEEE Sensors 2004, ., Ottobre 2004) [Contribution to conference proceedings]