Scientific publications

Bashir M.; Zonzini N.; Botez R.M.; Ceruti A.; Wong T., Flow Control around the UAS-S45 Pitching Airfoil Using a Dynamically Morphing Leading Edge (DMLE): A Numerical Study, «BIOMIMETICS», 2023, 8, pp. 1 - 27 [Scientific article] Open Access

Bashir M.; Zonzini N.; Longtin Martel S.; Mihaela Botez R.; Ceruti A.; Wong T., Numerical investigation of the dynamic stall reduction on the UAS-S45 aerofoil using the optimised aerofoil method, «THE AERONAUTICAL JOURNAL», 2023, Published online by Cambridge University Press: 22 September 2023, pp. 1 - 28 [Scientific article] Open Access

de Angelis E.L.; Giulietti F., An Improved Method for Swing State Estimation in Multirotor Slung Load Applications, «DRONES», 2023, 7, pp. 1 - 27 [Scientific article] Open Access

de Angelis E.L.; Giulietti F.; Rossetti G.; Turci M.; Albertazzi C., Toward Smart Air Mobility: Control System Design and Experimental Validation for an Unmanned Light Helicopter, «DRONES», 2023, 7, pp. 1 - 25 [Scientific article] Open Access

Dan Ryals, Andrea; Bertolani, Giulia; Pollini, Lorenzo; Giulietti, Fabrizio, An Improved Stability Analysis for the $\mathcal{L}_{1}$ Adaptive Augmentation of a Baseline Controller, in: 9th 2023 International Conference on Control, Decision and Information Technologies, CoDIT 2023, 2023, pp. 327 - 332 (atti di: 9th International Conference on Control, Decision and Information Technologies, CoDIT 2023, Rome (Italy), 3-6 July 2023) [Contribution to conference proceedings]

Ida E.; Carricato M., Static Workspace Computation for Four-Cable Underactuated Cable-Driven Parallel Robots, in: Advances in Mechanism and Machine Science - Proceedings of the 16th IFToMM World Congress 2023, Cham, Springer, 2023, pp. 588 - 598 (MECHANISMS AND MACHINE SCIENCE) [Chapter or essay]

Angelini M.; Ida E.; Bertin D.; Carricato M.; Mantovani E.; Bazzi D.; Orassi V., An Underactuated Cable-Driven Parallel Robot for Marine Automated Launch and Recovery Operations, in: Proceedings of the ASME 2023 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference : IDETC-CIE 2023, New York, American Society of Mechanical Engineers (ASME), «INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES & COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE», 2023, 8, pp. 1 - 10 (atti di: ASME 2023 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC-CIE 2023, Boston, USA, 20-23 August 2023) [Contribution to conference proceedings]

Natale, Christian; Naldi, Claudia; Dongellini, Matteo; Morini, GIAN LUCA, Long term performance analysis of a Dual-Source Heat Pump system by means of the Matlab/Simulink tool ALMABuild, in: 14th IEA Heat Pump Conference 2023 (HPC2023) Conference Proceedings, Heat Pumping Technology, 2023, pp. 1 - 12 (atti di: 14th IEA Heat Pump Conference 15-18 May 2023, Chicago (USA), 15-18 Maggio 2023) [Contribution to conference proceedings] Open Access

Giulia Martino; Claudia Naldi; Matteo Dongellini; Gian Luca Morini, Experimental Study of A LTES Made By a Finned Heat Exchanger Immersed In a Paraffinic PCM, in: Proceedings of the 8th World Congress on Momentum, Heat and Mass Transfer (MHMT'23), 2023, pp. 1 - 5 (atti di: 8th World Congress on Momentum, Heat and Mass Transfer, Lisbona (Portogallo), 26-28 Marzo 2023) [Contribution to conference proceedings]

Zanchini E.; Naldi C.; Dongellini M., Dimensionless fluid-to-ground thermal response of single-line bore fields with isothermal fluid, «APPLIED THERMAL ENGINEERING», 2023, 233, pp. 1 - 19 [Scientific article] Open Access

Mottola G.; Martini A., A Novel Spatial 3-DoF Constant-Force Generator for the Static Balancing of Parallel Robots, in: Advances in Mechanism and Machine Science. IFToMM WC 2023., «MECHANISMS AND MACHINE SCIENCE», 2023, 147, pp. 754 - 765 (atti di: The 16th IFToMM World Congress [WC2023], Tokyo, Japan, 5-10 November 2023) [Contribution to conference proceedings]

Croccolo D.; De Agostinis M.; Fini S.; Mele M.; Olmi G.; Campana G., Effects of infill temperature on the tensile properties and warping of 3D-printed polylactic acid, «PROGRESS IN ADDITIVE MANUFACTURING», 2023, N.D., pp. 1 - 16 [Scientific article] Open Access

Fratoni, G.; Garai, M.; D'Orazio, D., Assessment of modal density and free path distribution in central-planned halls, «THE JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA», 2023, 154, pp. 3604 - 3614 [Scientific article] Open Access

Croccolo, D; De Agostinis, M; Fini, S; Khan, MY; Mele, M; Olmi, G, Optimization of Bolted Joints: A Literature Review, «METALS», 2023, 13, pp. 1 - 31 [Scientific article] Open Access

Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Mele, Mattia; Olmi, Giorgio; Paiardini, Luca; Scapecchi, Chiara, FATIGUE RESPONSE OF DMLS MANUFACTURED AlSi10Mg: INFLUENCE OF BUILD ORIENTATION, HEAT AND SURFACE TREATMENTS, in: J.F. Silva Gomes, EXPERIMENTAL MECHANICS IN ENGINEERING AND BIOMECHANICS - Proceedings ICEM20 - 20th International Conference on Experimental Mechanics, Porto 2-7 July 2023, Porto, INEGI-Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, 2023, pp. 1093 - 1094 (atti di: ICEM20 - 20th International Conference on Experimental Mechanics, Porto (Portogallo), 2-7 Luglio 2023) [Contribution to conference proceedings]

Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Mele, Mattia; Olmi, Giorgio; Scapecchi, Chiara; Ciric-Kostic, Snezana; Bogojevic, Nebojsa; Soskic, Zlatan, AN EXPERIMENTAL STUDY ON HYBRID ADDITIVELY-MANUFACTURED MARAGING STEEL UNDER FATIGUE, in: J.F. Silva Gomes, EXPERIMENTAL MECHANICS IN ENGINEERING AND BIOMECHANICS - Proceedings ICEM20 - 20th International Conference on Experimental Mechanics, Porto 2-7 July 2023, INEGI-Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, 2023, pp. 1095 - 1096 (atti di: ICEM20 - 20th International Conference on Experimental Mechanics, Porto (Portogallo), 2-7 Luglio 2023) [Contribution to conference proceedings]

Peruzzini, M; Prati, E; Pelicciari, M, A framework to design smart manufacturing systems for Industry 5.0 based on the human-automation symbiosis, «INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING», 2023, 1, pp. 1 - 18 [Scientific article] Open Access

Mele M.; Cercenelli L.; Pisaneschi G.; Fiorini M.; Zucchelli A.; Campana G.; Tarsitano A.; Marcelli E., 3D Printing Of A Cranial Implant With Energy-Absorbing Polymer Via Arburg Plastic Freeforming Technology, «JOURNAL OF MECHANICS IN MEDICINE AND BIOLOGY», 2023, 23, pp. 1 - 16 [Scientific article]

Andreozzi A.; Asinari P.; Barletta A.; Bianco V.; Bocanegra J.A.; Vayssiere Brandão P.; Buonomo B.; Cappabianca R.; Celli M.; Chiavazzo E.; De Angelis P.; Diani A.; Filippeschi S.; Iasiello M.; Manca O.; Nardini S.; Nonino C.; Rossetto L., Heat Transfer and Thermal Energy Storage Enhancement by Foams and Nanoparticles, «ENERGIES», 2023, 16, pp. 1 - 24 [Scientific article] Open Access

Vayssiere Brandão P.; Alves L.S.D.B.; Rodriguez D.; Barletta A., Linear disturbance growth induced by viscous dissipation in Darcy-Bénard convection with throughflow, «JOURNAL OF FLUID MECHANICS», 2023, 974, pp. 1 - 26 [Scientific article] Open Access