Scientific publications

A. Barletta; D.A. Nield, Convection-dissipation instability in the horizontal plane Couette flow of a highly viscous fluid, «JOURNAL OF FLUID MECHANICS», 2010, 662, pp. 475 - 492 [Scientific article]

C. Martini; L. Ceschini; F. Tarterini; J.M. Paillard; J.A. Curran, PEO layers obtained from mixed aluminate–phosphate baths on Ti–6Al–4V: Dry sliding behaviour and influence of a PTFE topcoat, «WEAR», 2010, 269, pp. 747 - 756 [Scientific article]

L.Ceschini; Alessandro Morri; Andrea Morri; G. Pivetti; S. Messieri, Modelli sperimentali per la previsione delle proprietà a trazione di getti in lega Al-Si-Mg basati sulla durezza e sulle caratteristiche microstrutturali, in: null, «INDUSTRIA FUSORIA», 2010, 4, pp. 130 - 130 (atti di: XXX Congresso di Fonderia, Milano, 7-9 Ottobre 2010) [Abstract]

E. Varini; E. Bialoblocka-Juszczyk; M. Lannocca; A. Cappello; L. Cristofolini, Assessment of implant stability of cementless hip prostheses through the frequency response function of the stem-bone system, «SENSORS AND ACTUATORS. A, PHYSICAL», 2010, 163, pp. 526 - 532 [Scientific article]

G. Grasso; M. Frignani; F. Rocchi.; M. Sumini, Hierarchical agglomerative sub-clustering technique for particles management in PIC simulations, «NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH. SECTION A, ACCELERATORS, SPECTROMETERS, DETECTORS AND ASSOCIATED EQUIPMENT», 2010, 620, pp. 56 - 62 [Scientific article]

M. Bianchi; L. Branchini; A. De Pascale; F. Melino; A. Peretto ; R. K. Bhargava; M. A. Chaker, Gas turbine power augmentation technologies: a systematic comparative evaluation approach, in: Proceedings of ASME Turbo Expo 2010: Power for Land, Sea and Air, June 14 -18 Glasgow, Scotland, NEW YORK, ASME, 2010, pp. 1 - 9 (atti di: ASME Turbo Expo 2010: Power for Land, Sea and Air, Glasgow, Scotland, June 14 -18) [Contribution to conference proceedings]

A. De Pascale ; F. Fantozzi; M. Fussi; P. Laranci; A. Peretto, Experimental and Numerical Analysis of Natural Gas and Pyrolysis Syngas Combustion in a Microturbine Combustor, in: Proceedings of ASME-ATI-UIT 2010 Conference on Thermal and Environmental Issues in Energy Systems, NEW YORK, ASME, 2010, pp. 1 - 6 (atti di: ASME-ATI-UIT 2010 Conference on Thermal and Environmental Issues in Energy Systems, Sorrento, Italy, 16 – 19 May, 2010) [Contribution to conference proceedings]

L. Casarsa; A. De Pascale; D. Micheli; R. Radu, Experimental and Numerical Investigations on a Combustor Model for Syngas Swirl Flames, in: Proceedings of ECOS 2010, 23rd International Conference on Efficiency, Cost, Optimization, Simulation & Environmental Impact of Energy Systems, s.l, s.n, 2010, pp. 1 - 9 (atti di: ECOS 2010, 23rd International Conference on Efficiency, Cost, Optimization, Simulation & Environmental Impact of Energy Systems, Lausanne, Switzerland, June 14, 2010 – June 17, 2010) [Contribution to conference proceedings]

A. De Pascale; M. Fussi; A. Peretto, Numerical Simulation Of Biomass Derived Syngas Combustion In A Swirl Flame Combustor, in: Proceedings of ASME Turbo Expo 2010: Power for Land, Sea and Air, NEW YORK, ASME, 2010, pp. 1 - 12 (atti di: ASME Turbo Expo 2010: Power for Land, Sea and Air, Glasgow, Scotland, June 14 -18) [Contribution to conference proceedings]

C.Mora; R.Accorsi; M.Bortolini; M.Gamberi; R.Manzini; E.Ferrari, Life Cycle Assessment of a Photovoltaic-thermal Micro-cogeneration System, in: Proceedings of APMS2010- International Conference in Advances in Production Management Systems. Competitive and Sustainable Manufacturing Product and Services, MILANO, Poliscript- Politecnico di Milano, 2010(atti di: APMS2010- International Conference in Advances in Production Management Systems. Competitive and Sustainable Manufacturing Product and Services, Cernobbio (COMO) - Italy, 11-13 October 2010) [Contribution to conference proceedings]

Croccolo, D.; Vincenzi, N.; De Agostinis, M., Dossier: Analisi sulla sospensione, «M&A. MECCANICA & AUTOMAZIONE», 2010, 172, pp. 82 - 85 [Scientific article]

Croccolo; De Agostinis; Vincenzi, Experimental analysis on the tightening torque-preloading force relationship in threaded fasteners, in: Proceedings of IMECE10 2010, VANCOUVER, ASME, 2010, pp. 1 - 9 (atti di: ASME International Mechanical Engineering Congress and Exposition, Vancouver, British Columbia, Canada, November. 12 – November 18, 2010) [Contribution to conference proceedings]

Croccolo; De Agostinis; Vincenzi, STRUCTURAL ANALYSIS AND LOADS DISTRIBUTION IN MOTORBIKE FORKS DURING THE BRAKING PHASE, in: Proceedings of IMECE10 2010, VANCOUVER, ASME, 2010, pp. 1 - 10 (atti di: ASME International Mechanical Engineering Congress and Exposition November, Vancouver, British Columbia, Canada, November 12 – November 18, 2010) [Contribution to conference proceedings]

M. Sumini; A. Tartari; D. Mostacci; E. Ceccolini; F. Rocchi; G. Cucchi; M. Roson; M. Martignon; M. Ciocca; A. Facoetti; R. Orecchia, PHYSICAL AND RADIOBIOLOGICAL CHARACTERIZATION OF EXTREMELY HIGH DOSE PER PULSE XRAY BEAMS PRODUCED BY A PLASMA FOCUS DEVICE FOR IORT, in: Proceedings of the 6th International Conference of the International Society of Intraoperative Radiation Therapy, s.l, s.n, 2010, pp. 53 - 53 (atti di: 6th International Conference of the International Society of Intraoperative Radiation Therapy, Scottsdale, AZ, USA, Oct. 14-16, 2010) [Abstract]

G. Tani; A. Fortunato; A. Ascari; G. Campana., Laser surface hardening of martensitic stainless steel hollow parts., «CIRP ANNALS», 2010, 59, pp. 207 - 210 [Scientific article]

G. Bornia; A. Cervone; S. Manservisi, Optimal Control for Incompressible Steady MHD Flows via Constrained Extended Boundary Approach, in: Proceedings of the Fifth European Conference on Computational Fluid Dynamics, LISBONA, ECCOMAS, 2010, 1 (1085), pp. 1 - 19 (atti di: Fifth European Conference on Computational Fluid Dynamics, Lisbon, 14-17 June 2010) [Contribution to conference proceedings]

R. Benzi; E.S.C. Ching; E. De Angelis, Effect of Polymer Additives on Heat Transport in Turbulent Thermal Convection, «PHYSICAL REVIEW LETTERS», 2010, 104, pp. 024502-1 - 024502-1 [Scientific article]

Clairbois J.-P.; de Roo F.; Garai M.; Conter M.; Défrance J.; Oltean-Dumbrava C.; Fusco I., QUIESST: toward a better knowledge and understanding of how efficient noise barriers could actually be, in: Proc. MCA 01 - 1st Mediterranean Congress on Acoustics 2010, SALÉ, s.n, 2010, 1, pp. 1 - 8 (atti di: Proc. MCA 01 - 1st Mediterranean Congress on Acoustics 2010, Salé, 28-30 October 2010) [Contribution to conference proceedings]

Clairbois J.-P. ; Garai M., EN 14388: European standard for road traffic noise reducing devices: state of the art as from August 2010, in: Proc. MCA 01 - 1st Mediterranean Congress on Acoustics 2010, ., ., 2010, 1, pp. 1 - 6 (atti di: MCA 01 - 1st Mediterranean Congress on Acoustics 2010, Salé, 28-30 October 2010) [Contribution to conference proceedings]

Elia G.; Garai M., La nuova norma UNI 11367 sulla classificazione acustica delle unità immobiliari (relazione ad invito), in: Atti 2a convention nazionale di acustica edilizia "L’evoluzione e l’armonizzazione delle norme italiane ed europee sulla protezione acustica degli edifici", ROMA, Associazione Italiana di Acustica, 2010, 1, pp. GAE_2010_1 - GAE_2010_8 (atti di: 2a convention nazionale di acustica edilizia "L’evoluzione e l’armonizzazione delle norme italiane ed europee sulla protezione acustica degli edifici", Firenze, 13 dicembre 2010) [Contribution to conference proceedings]