Scientific publications

V. Colombo; E. Ghedini, Time Dependent 3-D Simulation of a DC Non-Transferred Arc Plasma Torch: Anode Attachment and Downstream Region Effects, in: AUTORI VARI, 17th International Symposium on Plasma Chemistry Abstracts and Full Papers CD, TORONTO, University of Toronto, 2005, pp. 163 - 164 (atti di: 17th International Symposium on Plasma Chemistry (ISPC-17), Toronto, Canada, 7 - 12 agosto 2005) [Abstract]

V. Colombo; E. Ghedini; A. Mentrelli; R. Benocci; A. Galassi, 3-D Turbulent Modeling of an ICPT With Detailed Gas Injection Section, in: AUTORI VARI, IEEE Conference Record - Abstract 2005 IEEE International Conference on Plasma Science, PISCATAWAY, NJ, Institute of Electrical and Electronics Engineers, 2005, pp. 274 - 274 (atti di: 2005 IEEE International Conference on Plasma Science (ICOPS 2005), Monterey, California, USA, 20 - 23 june 2005) [Abstract]

V. Colombo; E. Ghedini; A. Mentrelli; E. Malfa, 3-D Modelling of DC Transferred Arc Twin Torch for Asbestos Inertization, in: AUTORI VARI, IEEE Conference Record - Abstract 2005 IEEE International Conference on Plasma Science, PISCATAWAY, NJ, Institute of Electrical and Electronics Engineers, 2005, pp. 228 - 228 (atti di: 2005 IEEE International Conference on Plasma Science (ICOPS 2005), Monterey, California, USA, 20 - 23 june 2005) [Abstract]

Catania G.; Sorrentino S., Experimental Identification of a Fractional Derivative Linear Model for Viscoelastic Materials, in: 2005 Asme International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, s.l, Asme, 2005, 1, pp. 1 - 9 (atti di: 20TH Biennial Conference on Mechanical Vibration and Noise, Long Beach, CA, USA, September, 24-28, 2005) [Contribution to conference proceedings]

L. Garibaldi; L. Bregant; C. Valente; F. Brancaleoni; G. Catania, Railway Bridges Identification Techniques, in: 2005 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, s.l, ASME, 2005, 1, pp. 1 - 10 (atti di: 20TH BIENNIAL CONFERENCE ON MECHANICAL VIBRATION AND NOISE, Long Beach, CA, USA, September, 24-28, 2005) [Contribution to conference proceedings]

L. Bartoli; G. Olmi; R.A. Shenoi;, “Mechanical characterization of a GFRP at high strain rate”,, in: Experimental Mechanics, BOLOGNA, DIEM, 2005, 1(atti di: YSESM, Castrocaro Terme (Italia), May, 4th – 7th, 2005) [Abstract]

CORAZZA F.; SANCISI N.; PARENTI CASTELLI V.; LEARDINI A., A procedure for the evaluation of physiological ankle orthosis design parameters, in: ECCOMAS Thematic Conference Multibody Dynamics 2005 on Advances in Computational Multibody Dynamics, MADRID, ETS, 2005, pp. 1 - 16 (atti di: ECCOMAS Thematic Conference Multibody Dynamics 2005 on Advances in Computational Multibody Dynamics, Madrid, Spain, 21-24 Giugno 2005) [Contribution to conference proceedings]

VERTECHY R.; PARENTI CASTELLI V., An accurate and fast algorithm for the determination of the rigid body pose by three point position data, in: Proceedings of CK'05 International Workshop on Computational Kinematics, CASSINO, s.n, 2005, pp. 1 - 15 (atti di: CK'05 International Workshop on Computational Kinematics, Cassino, Italy, 4-6 Maggio 2005) [Contribution to conference proceedings]

SANCISI N.; PARENTI CASTELLI V., A Matlab based procedure for the solution of non-linearly constrained optimization problems, in: Proceedings of the 14th International Workshop on Robotics in Alpe-Adria-Danube Region, BUCHAREST, s.n, 2005, pp. 374 - 379 (atti di: 14th International Workshop on Robotics in Alpe-Adria-Danube Region, Bucharest, Romania, 26-28 Maggio 2005) [Contribution to conference proceedings]

A. Talamelli; H. Alfredsson, Status and recent developments in CICLoPE project, in: Proceeding of the Third International Workshop on Wall-Bounded Turbulent Flows, CHICAGO, s.n, 2005(atti di: Third International Workshop on Wall-Bounded Turbulent Flows, Chicago, Hilton, 17-19 November 2005) [Contribution to conference proceedings]

J. FRANSSON; A. TALAMELLI; L. BRANDT; C. COSSU, Transition delay by means of a passive mechanism, «BULLETIN OF THE AMERICAN PHYSICAL SOCIETY», 2005, 50, pp. 179 - 179 [Scientific article]

MANZINI R.; REGATTIERI A., MANUTENZIONE DEI SISTEMI DI PRODUZIONE. Modelli e Metodi per la Gestione della Produttività, della Qualità e della Sicurezza, BOLOGNA, Esculapio, 2005, pp. 354 (Progetto Leonardo). [Research monograph]

M. Frignani; D. Mostacci; F. Rocchi; M. Sumini, Montecarlo simulation of neutron backscattering from concrete walls in the Dense Plasma Focus Laboratory of Bologna University, «RADIATION PROTECTION DOSIMETRY», 2005, 115, pp. 380 - 385 [Scientific article]

C. Biserni; L.A. Terzi; C. Foletti, Efficienza termodinamica e razionalizzazione dei consumi energetici, in: Atti della Conferenza Nazionale sulla politica energetica in Italia, BOLOGNA, s.n, 2005(atti di: Conferenza Nazionale sulla Politica Energetica in Italia, Bologna, 18/19 Aprile 2005) [Contribution to conference proceedings]

E. Lorenzini; C. Biserni; M. Bondi, Studio sperimentale sugli aspetti dello scambio termico in un condotto percorso da aria in deflusso turbolento, in: Atti del 23° Congresso UIT sulla Trasmissione del Calore, PISA, ETS, 2005, pp. 99 - 103 (atti di: 23° Congresso UIT sulla Trasmissione del Calore, Parma, Giugno 2005) [Contribution to conference proceedings]

L.A. Rocha; E. Lorenzini; C. Biserni, Geometric optimization of shapes on the basis of Bejan's Constructal theory, «INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER», 2005, 32, pp. 1281 - 1288 [Scientific article]

A. Barletta; S. Lazzari; E. Rossi di Schio, Non-Boussinesq analysis of fully-developed mixed convection in an inclined rectangular duct, «FAR EAST JOURNAL OF APPLIED MATHEMATICS», 2005, 21, pp. 173 - 200 [Scientific article]

A. Barletta; S. Lazzari, 2D free convection in a porous cavity heated by an internal circular boundary, in: -, Proceedings of the Femlab Conference (Stockholm, Sweden, October 3-5, 2005), STOCCOLMA, Comsol, 2005, -, pp. 111 - 116 (atti di: Femlab Conference, Stockholm, Sweden, October 3-5, 2005) [Contribution to conference proceedings]

E. Aulisa; S.Manservisi; P. Seshaiyer, A non-conforming computational methodology for modeling coupled problems, «NONLINEAR ANALYSIS», 2005, 63, pp. 1445 - 1454 [Scientific article]

C. Saccani, An advanced simulation algorithm for gas-solid and gas-liquid conveying plant analysis, «BULK SOLIDS HANDLING», 2005, 25(4), pp. 234 - 238 [Scientific article]