Scientific publications

Clear search box

Open Access

8106 publications

R. VERTECHY; V. PARENTI CASTELLI, Real-Time Direct Position Analysis of Parallel Spherical Wrists by Using Extra Sensors, «JOURNAL OF MECHANICAL DESIGN», 2006, 128, pp. 288 - 294 [Scientific article]
Pulvirenti, Beatrice; Barletta, Antonio; Zanchini, Enzo, Finite-difference solution of hyperbolic heat conduction with temperature-dependent properties, «NUMERICAL HEAT TRANSFER PART A-APPLICATIONS», 2006, 34, pp. 169 - 183 [Scientific article]
Cristofolini, L.; Duda, G.; Prendergast, P., In-vitro pre-clinical assessment of hip stem loosening, «JOURNAL OF BIOMECHANICS», 2006, 39, pp. 126 - 127 [Abstract]
Varini, E.; Lannocca, M.; Bialoblocka, E.; Cappello, A.; Cristofolini, L., Primary stability assessment in hip arthroplasty: a device based on the vibrational technique, «JOURNAL OF BIOMECHANICS», 2006, 39, pp. 127 - 128 [Abstract]
Juszczyk, M.; Pallini, F.; Schileo, E.; Taddei, F.; Cristofolini, L., Improvement of experimental-numerical cross-validation in studies of the proximal femur, «JOURNAL OF BIOMECHANICS», 2006, 39, pp. 473 - 474 [Abstract]
Magro G.; Scarpanti S.; Sumini M.; Teodori F., Application of a dynamic computational GIS modeling methodology for exposure and dose risk assessment, in: Proceedings of the Second IASTED International Conference on Environmental Modelling and Simulation, 2006, 1, pp. 43 - 47 (atti di: IASTED International Conference on Environmental Modelling and Simulation, CALGARY, 29/11/2006) [Contribution to conference proceedings]
Donati L., The influence of die design on the performance of extruded profiles for automotive applications, «LIGHT METAL AGE», 2006, 64, pp. 28 - 78 [Scientific article]
Lorenzini M.; Morini G.L.; Musi B.; Spiga M., Flusso Elettroosmotico in microcondoti circolari, in: XXIII Congresso Nazionale sulla Trasmissione del Calore (UIT), PISA, ETS, 2005, 1, pp. 109 - 114 (atti di: XXIII Congresso UIT sulla Trasmissione del Calore, Parma, 20-22 Giugno 2005) [Contribution to conference proceedings]
V. Colombo; E. Ghedini; A. Mentrelli; S. Dallavalle; M. Vancini, 3-D Fluidynamic and Plasma Characterization of DC Transferred Arc Plasma Torches for Metal Cutting, in: AUTORI VARI, 17th International Symposium on Plasma Chemistry Abstracts and Full Papers CD, TORONTO, University of Toronto, 2005, pp. 365 - 366 (atti di: 17th International Symposium on Plasma Chemistry (ISPC-17), Toronto, Canada, 7 - 12 agosto 2005) [Abstract]
R. GAMBERINI; A. GRASSI; C. MORA; B. RIMINI, Life Cycle Analysis of reverse supply chain of a refrigerator, in: ICPR-18 - Conference proceedings, SALERNO, University of Salerno, 2005(atti di: 18th International Conference on Production Research- "The Networked Enterprise: a challenge for a sustainable development", Fisciano-SA, 31 Luglio-4 Agosto 2005) [Contribution to conference proceedings]
Colombo, Vittorio; Ghedini, Emanuele; Mentrelli, Andrea; E., Malfa, 3-D Modelling of DC Transferred arc Twin Torch for Asbestos Inertization, in: AUTORI VARI, Nuclear Reactor Physics. A collection of papers dedicated to Silvio Edoardo Corno, TORINO, C.L.U.T., 2005, pp. 169 - 196 [Chapter or essay]
ZAGNONI M.; GOLFARELLI A.; CALLEGARI S.; TALAMELLI A.; BONORA V.; SANGIORGI E.; TARTAGNI M., A non invasive capacitive sensor strip for aerodynamic pressure measurement, «SENSORS AND ACTUATORS. A, PHYSICAL», 2005, 123-124, pp. 240 - 248 [Scientific article]
H. HEROLD; M. STREITENBERGER; A. CASAGRANDE; A. MORRI; G. MINAK; CAMMAROTA G., Modello di calcolo del limite di fatica di materiali metallici contenenti difetti di solidificazione e di lavorazione, «LA METALLURGIA ITALIANA», 2005, 97 (3), pp. 37 - 40 [Scientific article]
FABBRI G., Optimum cross-section design of internally finned tubes cooled by a viscous fluid, «CONTROL ENGINEERING PRACTICE», 2005, 13, pp. 929 - 938 [Scientific article]
FERNANDEZ J.E; MOLINARI V.G; TEODORI F, Analysis of the Effects of Geometry on the Fluorescence Radiation Field in the Frame of the Transport Theory, «X-RAY SPECTROMETRY», 2005, 34, pp. 7 - 10 [Scientific article]
Manzini, Riccardo; Ferrari, Emilio; Gamberi, Mauro; Persona, A.; Regattieri, Alberto, Simulation performance in the Optimisation of the Supply Chain, «JOURNAL OF MANUFACTURING TECHNOLOGY MANAGEMENT», 2005, 16, pp. 127 - 144 [Scientific article]
MANZINI R.; GAMBERI M.; REGATTIERI A., Design and control of a flexible order picking system (FOPS): a new integrated approach to the implementation of an expert system, «JOURNAL OF MANUFACTURING TECHNOLOGY MANAGEMENT», 2005, 16, pp. 18 - 35 [Scientific article]
MORINI G.; M. LORENZINI; M. SPIGA, A Criterion for the Experimental Validation of the Slip-Flow Models for Incompressible Rarefied Gases Through Microchannels, «MICROFLUIDICS AND NANOFLUIDICS», 2005, 1(2), pp. 190 - 196 [Scientific article]
Meneghini, Andrea; Tomesani, Luca, Chill material and size effects on HTC evolution in sand casting of aluminum alloys, «JOURNAL OF MATERIALS PROCESSING TECHNOLOGY», 2005, 162-163, pp. 534 - 539 [Scientific article]
TOMESANI L. ; DONATI L., The effect of die design on the production and seam weld quality of extruded aluminium profiles, «JOURNAL OF MATERIALS PROCESSING TECHNOLOGY», 2005, 164-165, pp. 1025 - 1031 [Scientific article]