Scientific publications

Garcia, D.; Palazzetti, R; Trendafilova, I.; Fiorini, C.; Zucchelli, A., Vibration-based delamination diagnosis and modelling for composite laminate plates, «COMPOSITE STRUCTURES», 2015, 130, pp. 155 - 162 [Scientific article]

Giuliese, G.; Palazzetti, R; Moroni, F.; Zucchelli, A.; Pirondi, A., Cohesive zone modelling of delamination response of a composite laminate with interleaved nylon 6,6 nanofibres, «COMPOSITES. PART B, ENGINEERING», 2015, 78, pp. 384 - 392 [Scientific article]

Trendafilova, Irina; Palazzetti, Roberto; Zucchelli, Andrea, Damage assessment based on general signal correlation. Application for delamination diagnosis in composite structures, «EUROPEAN JOURNAL OF MECHANICS. A, SOLIDS», 2015, 49, pp. 197 - 204 [Scientific article]

Heidary, Hossein; Karimi, Navid Zarif; Ahmadi, Mehdi; Rahimi, Abdolreza; Zucchelli, Andrea, Clustering of acoustic emission signals collected during drilling process of composite materials using unsupervised classifiers, «JOURNAL OF COMPOSITE MATERIALS», 2015, 49, pp. 559 - 571 [Scientific article]

Saghafi, H; Brugo, T.; Minak, G.; Zucchelli, A., Improvement the impact damage resistance of composite materials by interleaving polycaprolactone nanofibers, «ENGINEERING SOLID MECHANICS», 2015, 3, pp. 21 - 26 [Scientific article]

Brugo, T.M.; Minak, G.; Zucchelli, A.; Saghafi, H.; Fotouhi, M., An Investigation on the Fatigue based Delamination of Woven Carbon-epoxy Composite Laminates Reinforced with Polyamide Nanofibers, «PROCEDIA ENGINEERING», 2015, 109, pp. 65 - 72 [Scientific article]

Giampietro Fabbri, I Sageti: allevatori di vacche onomasti dell’Eurasia, «SCIENZE E RICERCHE», 2015, 13, pp. 39 - 56 [Scientific article]

Piero Damerini; Riccardo Rossi; Luca Tassinari; Giampietro Fabbri, Analysis and optimization of a Puffer-type water heater, «ENERGY PROCEDIA», 2015, 81, pp. 1005 - 1012 [Scientific article]

Semprini, Giovanni; Barbieri, Davide; Gober, Alessandro; Zandi, Francesca, Effect of occupant behavior and control systems on the reduction of energy needs of residential buildings, «ENERGY PROCEDIA», 2015, 78, pp. 633 - 638 [Scientific article]

Mousli, Kindah; Semprini, Giovanni, Thermal performances of traditional houses in dry hot arid climate and the effect of natural ventilation on thermal comfort: A case study in Damascus, «ENERGY PROCEDIA», 2015, 78, pp. 2893 - 2898 [Scientific article]

Penazzi, Stefano; Accorsi, Riccardo; Dunstall, Simon; Ferrari, Emilio; Manzini, Riccardo, Issues, challenges, models and tools for the design, management and control of job-shop manufacturing system in food industry, in: ASOR NATIONAL CONFERENCE 2015, Melbourne, 2015, pp. 1 - 1 (atti di: ASOR NATIONAL CONFERENCE 2015, Melbourne, 18 March 2015) [Contribution to conference proceedings]

G. Semprini; F. Di Camillo, Aspetti tecnico-normativi della ventilazione nella riqualificazione energetica di edifici esistenti, «AICARR JOURNAL», 2015, 33, pp. 22 - 28 [Scientific article]

Boselli, Marco; Colombo, Vittorio; Gherardi, Matteo; Laurita, Romolo; Liguori, Anna; Sanibondi, Paolo; Simoncelli, Emanuele; Stancampiano, Augusto, Characterization of a Cold Atmospheric Pressure Plasma Jet Device Driven by Nanosecond Voltage Pulses, «IEEE TRANSACTIONS ON PLASMA SCIENCE», 2015, 43, pp. 713 - 725 [Scientific article] Open Access

Fantini, M; De Crescenzio, F.; Ciocca, L.; Persiani, F., Additive manufacturing to assist prosthetically guided bone regeneration of atrophic maxillary arches, «RAPID PROTOTYPING JOURNAL», 2015, 21, pp. 705 - 715 [Scientific article]

Ponti, Fabrizio; Ravaglioli, Vittorio; De Cesare, Matteo; Stola, Federico, Torque and Center of Combustion Evaluation Through a Torsional Model of the Powertrain, «JOURNAL OF DYNAMIC SYSTEMS, MEASUREMENT AND CONTROL», 2015, 137, pp. 061005 - 061013 [Scientific article]

Frau, Giuseppe; de Crescenzio, Francesca; Taurino, Damiano, Graphic visualization of probabilistic traffic/trajectory predictions in mobile applications. A first prototype and evaluations for general aviation purposes, in: Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), Springer Verlag, 2015, 9171, pp. 154 - 164 (atti di: 17th International Conference on Human Computer Interaction, HCI International 2015, usa, 2015) [Contribution to conference proceedings]

Emanuele Ghedini; Alberto Procacci, Effects of operating pressure on the cathode surface temperature and current profile in a plasma arc cutting torch, in: Proceedings of the ISPC 2015, 2015, pp. 1 - 4 (atti di: ISPC 22 - 22nd International Symposium on Plasma Chemistry, University of Antwerp, Stadscampus, Antwerp, Belgium, 5-10 July 2015) [Contribution to conference proceedings]

Sara Bagassi; Francesca Lucchi; Franco Persiani, Aircraft Preliminary Design: a Windowless Concept, in: CEAS 2015, 5th CEAS (Council of the European Aerospace Societies) Air&Space Conference Proceedings, 2015, pp. 1 - 7 (atti di: CEAS 2015, 5th CEAS (Council of the European Aerospace Societies) Air&Space Conference, Delft, The Netherlands, 7-11 settembre 2015) [Contribution to conference proceedings]

Gamberoni, A.; Donati, L; Reggiani, B.; Haase, M.; Tomesani, L.; Tekkaya, A.E., Industrial Benchmark 2015: Process Monitoring and Analysis of Hollow EN AW-6063 Extruded Profile, «MATERIALS TODAY: PROCEEDINGS», 2015, 2, pp. 4714 - 4725 [Scientific article]

Cimarelli, A.; Cocconi, G.; Fronhapfel, B.; De Angelis, E., Spectral enstrophy budget in a shear-less flow with turbulent/non-turbulent interface, «PHYSICS OF FLUIDS», 2015, 27, pp. 1 - 16 [Scientific article]